Matching the scan abutments

Aus Amann Girrbach
Wechseln zu: Navigation, Suche
Fahne Deutsch.JPG



Choose Type of implant

Indiv Abutment Wizard.PNG


We will choose the type of implant by unfolding the combo box [1] and select one of the ranges. After that we have to choose the diameter [2] to get a correct fitting on the titanium clue base.
By using the Info button [3] you can get information about the chosen implant library.




Detect implant position

Look at the red point [4] on the scan abutment in the wizard window. Click at the same position on the scan data and after that „Best fit matching“ [6] to position the scan abutment correctly. Then click „Next“ to fit other implant positions or proceed with the next wizard step.
Sometimes when the scan data is not optimal and you have artefacts in the lower part, in example the adjacent teeth are to close to the scan abutments, then it may help to cut away the lower part of the geometry from the scan abutment for matching by increasing the slider [5]. This a way which might help improve results.

TipOverview: Overview Ceramill M-Plant (Implants)