Generating and processing monoblock: Unterschied zwischen den Versionen

Aus Amann Girrbach
Wechseln zu: Navigation, Suche
(Situation 4 – Change of tooth sets necessary)
(Situation 5 – Korrektur der Bisslage notwending)
Zeile 628: Zeile 628:
 
<br>
 
<br>
  
==Situation 5 – Korrektur der Bisslage notwending==
+
==Situation 5 – Correction of bite necessary==
  
  
Beigeänderter Bisslage werden zuvor berechnete statische Aufstellbereiche hinfällig und müssen aktualisiert werden.
+
If the bite has changed, the previously calculated static set-up areas have become void and need to be updated.
  
__Die Modelle müssen hierfür umartikuliert worden sein
+
__To this purpose, the models need to be re-articulated.
  
__Der Fall muss daher neu angelegt und mit geänderter Bisslage/Artikulation gescannt werden, um die dadurch geänderten
+
__The case must therefore be generated new and scanned with the changed bite/articulation in order to determine the thus changed static set-up areas new.
statischen Aufstellbereiche neu ermitteln zu können.
 
  
__Die zuvor einprobierte Monoblockprothese kann als Aufstellhilfe in Form eines Situationsmodells dienen
+
__The previous tried-in monoblock denture can act as set-up aid in the form of a situation model.
  
  
 
[[File:5.1.png|200px|left]]
 
[[File:5.1.png|200px|left]]
'''Fall duplizieren'''
+
'''Duplicating a case'''
  
__„Duplizieren“ (Duplicate) klicken und „Projekt“ (Project) wählen
+
__Click "Duplicate" and select "Project"
  
__OK zum Übernehmen
+
__OK to confirm
 
 
->Patientenfall wird komplett dupliziert; sämtliche Projektdaten werden
 
übernommen
 
  
 +
->The patient is duplicated completely, all project data are
 +
transferred
  
 
[[File:Zahnbogen.png|200px|left]]
 
[[File:Zahnbogen.png|200px|left]]
  
'''Indikation aktualisieren'''
+
'''Updating the indication'''
  
__Zahn anklicken
+
__Click on tooth
  
  
 
[[File:Options parameters.png|200px|left]]
 
[[File:Options parameters.png|200px|left]]
  
__Unter Optionen und Parameter „Separater Situ-Scan“ (Scan a prep-op
+
__Select "Scan a prep-op model" under options and parameters
model) auswählen
 
  
__OK zum Übernehmen
+
__OK to confirm
  
__Anschließend pro Zahn per STRG + Klicken anwenden
+
__Then use CTRL + click per tooth
  
  
Zeile 676: Zeile 673:
 
[[File:3.1.png|200px|left]]
 
[[File:3.1.png|200px|left]]
  
'''Scan-Software öffnen'''
+
'''__Open the scanning software'''
  
__Fall komplett neu scannen und Anweisungen der Scansoftware folgen
+
__Scan the case completely new and follow the instructions of the scanning software
  
__Die Monoblock-Prothese als Situationsmodell scannen
+
__Scan the monoblock denture as situation model
  
 
[[File:1.1.png|200px|left]]
 
[[File:1.1.png|200px|left]]
'''CAD-Software starten'''
+
'''Start CAD software'''
  
__Wizardmodus zum Konstruieren der Totalprothese folgen.
+
__Follow the Wizard mode for designing the full denture.
  
__Die zuvor gescannte Monoblockprothese erscheint automatisch als
+
__The prior scanned monoblock denture automatically appears as situ
Situmodell und kann als Aufstellhilfe genutzt werden.
+
model and can be used as aid for the set-up.
  
  
 
[[File:1.3.png|200px|left]]
 
[[File:1.3.png|200px|left]]
  
'''CAM-Software starten'''
+
'''Start CAM software'''
  
_ Wizardmodus -> „Weiter zur Produktion“ (Proceed to production)
+
__Wizard mode ¬ "Proceed to production“
  
  

Version vom 14. Dezember 2017, 15:50 Uhr

Fahne Deutsch.JPG



It is possible to fabricate a try-in as a single piece from tooth-coloured wax prior to milling the bases in resin. This then serves to correct the digital set-up.


Generation in CAD

9 Monoblock zusammenfügen.png

The function for creating monoblock prostheses can be selected in the context menu after modification of the denture bases and teeth. After changing to the expert mode, this menu can be opened in the background with a right click.

19 Merge to Monoblock.jpg


To create the monoblock prosthesis, one selects the function „Full denture merge to monoblock“ [5]. Then the maxilla and mandible are each saved as single pieces including the teeth, and can be milled subsequently.


TipThe generated monoblock data sets are not exported, but are saved exclusively with the scenario..



Processing of monoblock dentures in the Ceramill System after patient try-in

14 neu.png

After the try-in of monoblock dentures in the patient's mouth, a number of situations may arise where possible necessary changes need to be included in the final resin denture within the Ceramill Mind software. These can be applied by markings on the monoblock denture. The procedures for the following situations are explained subsequently:





__Situation 1 – No changes necessary following try-in

__Situation 2 – Change of gingival shape necessary

__Situation 3 – Change of tooth positions necessary

__Situation 4 – Change of tooth sets necessary

__Situation 5 – Correction of bite necessary


Starting further processing is performed via the desktop link "Ceramill Mind“ as a matter of principle.


Situation 1 – No changes necessary following try-in

1.1.png

Start CAD software

__Via database -> Ceramill Mind


1.2.png


Load scene file


1.3.png



Start CAM software

_ Wizard mode ¬ "Proceed to production“


1.4.png

No, ignore the monoblock parts and only nest the actual denture.


Situation 2 – Change of gingival shape necessary

1.1.png

Start CAD software __Database -> Ceramill Mind


1.2.png


Laod scene file


2.3.png



Start expert mode



Delete constructed parts.png

Delete monoblock

Delete Reconstructions.png

__Right click ¬ "Delete constructed parts"

__Select "Merged parts" and delete




Basis freiformen.jpg




Free-forming of the base

__Right click ¬ "Free-form merged reconstruction"

__Confirm changes with OK




CAM.png

Start CAM Software

__Via "Additional Tools" in the right tool bar ¬ "CAM Software“


Situation 3 – Änderung von Zahnpositionen notwendig

3.1.png

Open the scan software

__Via database -> Ceramill Map

3.2.png


Scan the monoblock denture

__Load existing case via "Continue" and via tool bar "Add additional scan"


1.1.png




Start CAD software __Via database -> Ceramill Mind


1.2.png


Load scene file


2.3.png



Start expert moden



Delete constructed parts.png

Delete construction elements

Delete Reconstructions.png


__Right click ¬ "Delete constructed parts"

__Select "Merged parts" and delete

Adapted denture base delete.png






__Select "Adapted denture bases" and delete


3Toolbar.png






Adding monoblock scan


AddRemoveMesh.png


__Add/Remove mesh via tool bar


AddRemoveMesh2.png

__Select "Prep-op scan" under "Select mesh type"

__Select upper or lower jaw under "Select jaw"

__Click "Load" to select the scan file of the monoblock

__Select "Align meshes" to start the alignment of the scanned monoblock denture





Monoblock.jpg

__Assign monoblock denture via 3-point alignment

__Confirm with "OK"




CorrectPlacement.png

Correcting tooth placement

Placement.jpg

__Via context menu "Correct placement"

__The scanned monoblock denture can be used as orientation for rearrangement

__Confirm changes with OK






DesignDentureBase.png


Creating a new denture base

DesignDentureBase2.png


__Right click ¬ “Design denture base"

__Select Apply

__OK to confirm








AdaptDentureBase.png

Adapting the denture base and teeth


AdaptDentureBase2.png

__Right click ¬ "Adapt denture base to teeth"

__Select Apply

__OK to confirm






Freeform2.png

If applicable, free-form the merged parts

Basis freiformen.jpg


__Right click ¬ "Free-form reconstructions"

__OK for confirming changes





CAM.png

Start CAM software

__Via "Additional Tools" in the right tool bar ¬ "CAM Software“


Situation 4 – Change of tooth sets necessary

3.1.png

Open the scanning software

__Via database -> Ceramill Map

3.2.png


Scan the monoblock denture

__Load existing case via "Continue" and via tool bar "Add additional scan"


1.1.png




Start CAD software __Via database -> Ceramill Mind


1.2.png


Load scene file


2.3.png



Start expert mode



Delete constructed parts.png

Delete construction elements

Delete Reconstructions.png


__Right click -> "Delete constructed parts"

__Select "Merged parts" and delete

Adapted denture base delete.png






__Select "Adapted denture bases" and delete


3Toolbar.png






Adding monoblock scan


AddRemoveMesh.png


__Via tool bar -> Add/Remove mesh


AddRemoveMesh2.png

__Select "Prep-op scan" under "Select mesh type"

__Select upper or lower jaw under "Select jaw"

__Click "Load" to select the scan file of the monoblock

__Select "Align meshes" to start the alignment of the scanned monoblock denture


Monoblock.jpg

__Assign monoblock denture via 3-point alignment



DentureToothPlacement.png





Modifying the tooth set

DentureToothPlacement2.png


__Right click -> "Denture tooth placement)"

__Select tooth set and set up accordingly

__OK to confirm




CorrectPlacement.png

Correcting tooth placement

Placement.jpg


__Right click -> "Correct placement"

__Rearrange teeth as desired

__The scanned monoblock denture can be used as orientation

__OK to confirm




DesignDentureBase.png


Creating a new denture base

DesignDentureBase2.png


__Right click -> “Design denture base"

__Select Apply

__OK to confirm









AdaptDentureBase.png

Adapting the denture base and teeth


AdaptDentureBase2.png

__Right click -> "Adapt denture base to teeth"

__Select "Apply"

__OK to confirm






Freeform2.png

If applicable free-form merged reconstructions

Basis freiformen.jpg


__Right click -> "Free-form reconstructions"

__OK for confirming changes





CAM.png

Start CAM software

__Via "Additional Tools" in the right tool bar -> "CAM Software“




Situation 5 – Correction of bite necessary

If the bite has changed, the previously calculated static set-up areas have become void and need to be updated.

__To this purpose, the models need to be re-articulated.

__The case must therefore be generated new and scanned with the changed bite/articulation in order to determine the thus changed static set-up areas new.

__The previous tried-in monoblock denture can act as set-up aid in the form of a situation model.


5.1.png

Duplicating a case

__Click "Duplicate" and select "Project"

__OK to confirm

->The patient is duplicated completely, all project data are transferred

Zahnbogen.png

Updating the indication

__Click on tooth


Options parameters.png

__Select "Scan a prep-op model" under options and parameters

__OK to confirm

__Then use CTRL + click per tooth




3.1.png

__Open the scanning software

__Scan the case completely new and follow the instructions of the scanning software

__Scan the monoblock denture as situation model

1.1.png

Start CAD software

__Follow the Wizard mode for designing the full denture.

__The prior scanned monoblock denture automatically appears as situ model and can be used as aid for the set-up.


1.3.png

Start CAM software

__Wizard mode ¬ "Proceed to production“