M-part Bild/Text prägen: Unterschied zwischen den Versionen

Aus Amann Girrbach
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: „20px|left|link=M-part Emboss with Image <br> Emboss with Image or Text. Useful for placing logos, labels, or very custom stippl…“)
(kein Unterschied)

Version vom 17. November 2017, 08:35 Uhr

Fahne Englisch.jpg



Emboss with Image or Text. Useful for placing logos, labels, or very custom stipple patterns on large areas of mesh. To use, Select the mode (image or text), Adjust the parameters (width/depth, embosss and de-boss), click cursor to place, and click Apply.

Mpart embossImage bar.png

  • Select Image [1] - Selects an image to emboss. If the area to be embossed is larger than the image size, the image will be repeated in both x and y as required. A 1:1 blue proposal will be created. Left click to place proposal on model.
  • Select Text [2] presents a dialog box, see text settings below. When updated, a 1:1 blue proposal will be created under the cursor. Left-Click to place proposal on model.
  • Invert Image [3] inverts text and background areas in the image or text proposal.
  • Width [4] sets the overall width of the text or image to be embossed. The aspect ratio is fixed by the text proposal.
  • Emboss [5] sets the mode to emboss (i.e. add to the surface of the existing wax).
  • De-Boss [6] sets the mode to deboss (i.e. subtract from the surface of the existing wax)
  • Depth [7] the depth to embosss or de-boss the image or text.
  • Preview [8] shows a wax preview of the effect of the emboss/deboss operation.
  • Apply [9] Converts the blue proposal to wax. Control-Z to undo.



Text Settings

Mpart embossImage text.png

    • Enter text in Text: [10] box, you can enter multi-line text using "Enter"
    • Set Font... [11] if required. Adjust the Font, Style, the rest of the controls have no effect.
    • Click Save... [12] to save frequently used text as an image for next time. It is saved as a black and white image (.bmp format) in the PartialTechPreview\Patterns folder.
    • Click Update [13] to update the blue proposal under the cursor.

Close the text settings box to dismiss the settings window.

Tip Some text may be too small to be read. Always check the result to make sure text is legible, especially over stippled areas.


TipNext: Retension
TipÜbersicht: Ceramill M-Part