M-part Makierer: Unterschied zwischen den Versionen

Aus Amann Girrbach
Wechseln zu: Navigation, Suche
(Die Seite wurde neu angelegt: „20px|left|link=M-part Connector <br> Mask Tool - general-purpose tool can mask (i.e. prevent changes) to a paint-selected area o…“)
 
Zeile 1: Zeile 1:
[[Image:Fahne_Englisch.jpg|20px|left|link=M-part Connector]]
+
[[Image:Fahne_Englisch.jpg|20px|left|link=M-part Mask]]
  
  

Version vom 23. November 2017, 09:25 Uhr

Fahne Englisch.jpg



Mask Tool - general-purpose tool can mask (i.e. prevent changes) to a paint-selected area of the wax. To use, just paint on the wax you want to preserve.

Mpart mask bar.png

  • The Eraser [1] paint-selects an area to delete from the mask.
  • The Select All [2] selects the entire model to be masked.
  • The Select None [3] icon de-selects the entire model from masking.
  • Invert Selection [4] reverses the masked and un-masked areas of the wax.
  • Diameter [5] adjusts the size of the tool for painting and erasing areas to be masked.
  • Falloff [6] adjusts the dynamics at the edge of the masked area, i.e. 100% falloff means that the mask has sharp edges, while 50% means that the mask has gradual effect at the edges.
  • Opacity [7] this slider adjusts the amount of masking, i.e. 100% means the masked wax cannot be changed at all, while 50% means that any edits will reduce their strength by 50% in the masked areas.


TipÜbersicht: Ceramill M-Part